Clinician Support
- Reeco original last is a classic toe shape with a rounded top profile and through depth for insole of 3 x 3mm
- Nova (Hidden depths) last is a more elegant last shape for both ladies and men with a square walled top profile this is a more modern shape with 3 x 3mm insole.
- Nature last is ideal for the “at risk” foot this shape is a modern walking shoe shape with a flat top profile the last shape is wider and compliments the natural contours of the foot reducing medial and lateral forefoot pressures with a through depth for insole of 3 x 3mm
- Solace last has been designed to accommodate the painful foot and its arthritic changes. The toe has been extended enabling us to narrow the end producing a more flattering shape enabling us to achieve a combination of fashion and function. The waist and seat has been narrowed and the bottom profile gently tapered to reduce stress on the met heads it has a through depth with a through depth for insole of 2 x 3mm.
- Lowline last is available in all toe shape excluding solace this last has a reduced insole allowance depth of 6mm = 1 x 3mm insole.
1 Toe depth
2-Joint width lateral/medial
3-Joint depth
4-Instep depth
5-Heel width (around heel ball)
Additions are available in multiples of
3mm any adaption over 6mm will require a Bespoke pattern.
Please indicate the last adaptions you require in the format below, e.g.
Increase instep circumference to 250mm
Increase toe box depth by 9mm
Increase joint circumference to 230mm
Increase joint width medially by 3mm
3mm through depth to accommodate additional insole allowance
Toe depth – as the toes shouldn’t be in the end of the shoe we place our adaption just back from the edge to maintain the cosmetics of the shoe. (see toe box fitting position)
Heel width – if you require width in this area give us a long and short heel measure to enable us to place the adaption in the optimum position.
Joint width – if you are adding to this area as a bunion pocket or just extra width, tell us if it is required medially or laterally. It should be noted that an increase in joint width will automatically produce an increase in circumference.
Please note that only additions can be made to the last. If reductions are required then bespoke lasts will have to be made.
